Connecting to New CBYC Internet System Instructions


CONNECTING to the IMPROVED CBYC INTERNET SYSTEM

  1. The new Internet System is now available in ALL buildings.
  2. Cable modems will not operate after October 15!!
  3. Instructions if you have a computer directly plugged into the Motorola Cable modem:
    1. Unplug Ethernet cable from back of modem.
      modem_plug
    2. Plug Ethernet cable into newly install internet jack in your unit.
      new_jack
    3. Restart computer.
    4. If Ethernet cable does not reach outlet you can either relocate equipment or longer cables can be purchased at retailers like Walmart, Best Buy, Staples, Office Depot and online. Cables must be Category 5e or Category 6 Network cables.
  4. If you have a combined cable/modem & wireless router – STOP – you cannot plug in or use the combo unit on the new system.
  5. If you have a Wireless Router plugged into the Motorola Cable modem:
    1. Unplug Ethernet cable from back of modem.
    2. Plug Ethernet cable into newly install internet jack in your unit.
    3. Power off router. Wait 20 seconds. Restore power to router
    4. If Ethernet cable does not reach outlet you can either relocate your router or longer cables can be purchased at retailers like Walmart, Best Buy, Staples, Office Depot and online. Cables must be Category 5e or Category 6 Network cables.
  6. When you have verified your internet connection on the new system power off the cable modem. Please remove your cable modem and also disconnect the cable at the wall  outlet.

 

Revision 1.2  November, 2017